This Shelby Cobra 427 S/C CSX4000 is a fiberglass-bodied continuation car built by H.R.E. Motorcars in 2006.
This car is chassis number 4829, and power is from a Shelby America all-aluminum 427ci V8 with Shelby aluminum heads stroked to 482 cubic inches that is paired with a Tremec five-speed manual gearbox.
The 482ci Shelby alloy-block V8 is mated to a five-speed Tremec TKO 600 gearbox and sends power to the rear wheels via a custom driveshaft.
The engine is topped with an eight-stack sequential fuel-injection unit by TWM (now Borla).
Fabricating, machining, assembly, and blueprinting was by B&B Automotive Machine Shop.
The most recent service was done in March 2023 and included a new battery, a valve adjustment, spark plugs, an oil and filter change, new fuel filters, and a check of all fluids.
In March 2023 the frame rails were cleaned, prepped, and epoxy primed, and the chassis was painted.
The body is finished in black with black side pipes and a black roll bar.
3M paint-protection film has been applied to the hood, the front fascia, and the front and rear fender flares.
Quick-jack bumpers are fitted front and rear, and the battery is located in the trunk.
Powder-coated Vintage Wheels with polished rims and knock-off hubs measure 17″ x 8.5″ up front and 17″ x 10.5″ at the rear.
Michelin Pilot Sport tires size 245/45 in front and 335/35 at the rear.
The interior is black leather, and this car was specified with a short shifter, door pockets, a fire extinguisher, and a hidden kill switch.
The driver’s seat is bolted to the floor—using stock holes—to make for a lower seating position and more legroom.
Simpson shoulder belts can be mounted to the roll bar and are included in the sale.
Equipment includes a detachable steering wheel with a wood rim, a heater and defroster, a fuel gauge, and a fuel-pressure gauge.
A plate on the dash from Shelby Automobiles identifies this 427 S/C as CSX4829, and Carroll Shelby signed the sun visor.
The odometer shows just over 5,600 miles.
